South Jordan Foundation Pros
Foundation Crack Repair in South Jordan, UT
Foundation crack repair in South Jordan, UT with epoxy and polyurethane injection for structural and water-entry cracks. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving South Jordan and nearby communities.
Not every foundation crack means a structural problem, but a diagonal crack that's widening, or one that lets water in every spring, is worth a real look rather than a tube of hardware store caulk. Foundation crack repair uses epoxy or polyurethane injection to fill the crack from the inside out and restore a proper seal.
South Jordan Foundation Pros checks crack width, direction, and whether water is actively coming through before recommending epoxy, which bonds structurally, or polyurethane, which flexes and blocks moisture, since clay-heavy soil here keeps working on a wall long after the first crack shows up.
What's included
What's Included
Typically included Optional Customer prep
- Crack inspection for width, direction, and water entry
- Surface cleaning and prep along the crack
- Injection port setup and sealant injection
- Surface finishing to blend the repair
- Interior wall coating for added moisture protection
- Exterior grading advice if water is pooling against that wall
- Clear the area in front of the crack for access
- Note whether the crack leaks during rain or snowmelt
Want a clearer scope?
Get a Free EstimateHow it works
How Our Foundation Crack Repair Process Works
Step 1Crack Inspection
We examine each crack to determine type, width, and likely cause.
Step 2Surface Cleaning
Debris and loose material get cleared from the crack area.
Step 3Injection Port Setup
Ports go in along the crack to allow controlled material injection.
Step 4Sealant Injection
Epoxy or polyurethane is injected to fill and bond the crack fully.
Step 5Surface Finishing
Excess material is removed and the surface gets smoothed.
Step 6Final Inspection
We confirm a watertight, stable seal before calling the job done.
Materials
Materials and Methods for Foundation Crack Repair
Epoxy Injection Resin
Bonds structural cracks for added strength, the right call on non-moving cracks that need rigidity.
Polyurethane Foam Sealant
Expands to fill cracks and block water, which matters most for walls facing spring runoff pressure.
Injection Ports
Let us deliver sealant at controlled depth along the full crack length.
Surface Primer
Preps the concrete so the sealant actually bonds instead of sitting on the surface.
Masonry Patch Compound
Finishes and blends the repaired area with the surrounding wall.
Protective Topcoat
Shields the repair from the moisture that caused the crack in the first place.
Questions on materials?
Get a Free EstimateTimeline
How long does a Foundation Crack Repair take?
- 01
Stage 1
same-dayMost crack repairs are a visit unless multiple walls or active leaks are involved.
- 02
Consult and inspection
same day - 03
Crack cleaning and prep
1–2 hours - 04
Injection and sealing
1–3 hoursper crack
- 05
Surface finishing
same visit
- 06
Final inspection
same day
Need a schedule that fits?
Get a Free EstimateBefore & after
Before and After Foundation Crack Repair
Before 
After
FAQs
Foundation Crack Repair FAQs
How much does foundation crack repair cost in South Jordan?
Pricing depends on crack length, whether it's actively leaking, and whether epoxy or polyurethane is the right material. A single crack is a much smaller job than multiple walls, and we quote after inspection.
Is epoxy or polyurethane better for my crack?
Epoxy bonds rigidly and suits structural, non-moving cracks. Polyurethane flexes and is the better choice when water is actively coming through, since it expands to seal moving joints.
Is a hairline crack normal or something to worry about?
Hairline cracks under about 1/8 inch with no water entry are common in poured concrete and usually cosmetic. Cracks that are widening, diagonal, or stair-stepped deserve a closer look.
Do I need a permit for foundation crack repair?
Crack injection alone typically doesn't require a permit since it doesn't change the structure's load path. We'll flag it if your specific situation needs one.
Is DIY crack repair a good idea?
Surface sealants can mask a crack temporarily but don't stop the soil movement or hydrostatic pressure causing it, so the crack often reopens. Injection that bonds through the full depth of the wall needs the right equipment and material.
How long does foundation crack repair take?
Most single-crack repairs finish in one visit, usually a few hours from inspection through final finishing.
Next step
Get a Foundation Crack Repair Estimate in South Jordan
Call (435) 518-1844 or request a free estimate and we'll tell you which sealant actually fits your crack.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in South Jordan, UT: pier installation, crack control, and wall leveling with free written estimates.
Piering and Underpinning
Steel push pier and helical pier underpinning in South Jordan, UT to stop foundation settlement for good. Free estimates.
Wall Stabilization
Bowing basement wall repair in South Jordan, UT using wall anchors and carbon fiber reinforcement. Free estimates.
Ask about Foundation Crack Repair
Tell us about the project and how to reach you.